For standard VCDS clone applications, configure your fuses to match the following hexadecimal values:
Before writing to the microcontroller, you must ensure the FTDI USB chip communicates properly with your PC and holds the correct Vid/Pid values (usually VID 0403 and PID FA24 or 6001 ). Connect the clone cable directly to your PC via USB. vcds atmega162 reflash
Connect the VCDS cable to your PC via its standard USB cable. For standard VCDS clone applications, configure your fuses
Manages the USB-to-serial communication between your PC and the ATmega162. For standard VCDS clone applications