Replace the iron tip if it becomes heavily oxidized or deformed. Troubleshooting (Updated Procedures)
| Parameter | Soldering Station | Hot Air Station | | :--- | :--- | :--- | | | 60 W | 270 W | | Voltage | 24 V AC (via transformer) | 230 V AC / 50-60 Hz | | Temp Range | 200°C – 480°C | 150°C – 500°C | | Air Flow | N/A | 0.16 – 1.2 Nm³/h (Stepless) | | Ground Resistance | < 200 mΩ | < 200 mΩ | | Heater Type | Ceramic (Imported) | Membrane Pump + Ceramic Core | gordak 952 user manual updated
Arthur scrambled out from under the machine. He stood up, panting. The shop was quiet. The machine was just a machine again. Cold. Dead. Replace the iron tip if it becomes heavily