Connect the remote start signal wires from your Automatic Transfer Switch (ATS) to the designated input terminals on the back of the AC03. Press the button.
Descriptions of the front panel, buttons, and display indicators. pramac ac03 manual
platform. Below is a report on its primary functions and operational modes. Core Control Buttons Connect the remote start signal wires from your
: Cycles the system between the base functional profiles (OFF, MAN, AUT, TEST). platform
once the unit arrives at rated speed and voltage. Halting the Generator Press the STOP button once to start the cooling delay.
LED indicators that light up when a fault occurs (e.g., low oil pressure, high temperature). 3. Key Operational Procedures 3.1. Starting the Generator (Manual Mode) Ensure the generator is fueled and checked. Press the Mode button to select Manual Mode .