Eppendorf 5402 - Manual

Aerosol-tight rotors or caps should always be utilized when spinning hazardous materials, pathogens, or radioactive samples. 5. Routine Maintenance and Care

Before operating the Eppendorf 5402, you must understand its mechanical and electrical limitations to ensure safe and efficient operation. Feature / Parameter Specification Detail 14,000 Rotations Per Minute (RPM) Maximum Relative Centrifugal Force (RCF) 16,000 × g Temperature Control Range -9°C to +40°C Standard Rotor Capacity 18 x 1.5 mL / 2.0 mL microcentrifuge tubes Timer Range 1 to 99 minutes, plus a continuous run option ("Hold") Power Requirements 120V (60 Hz) or 230V (50-60 Hz) depending on regional model Refrigerant Type CFC-free cooling system 2. Installation and Initial Laboratory Setup eppendorf 5402 manual

Avoid placing the unit in direct sunlight, near heating vents, or adjacent to high-heat autoclaves. Ambient temperatures should remain between 15°C and 35°C. Aerosol-tight rotors or caps should always be utilized

Remain with the instrument until it reaches its target RPM to ensure no severe vibrations or unusual noises occur during the acceleration phase. 5. Cleaning, Maintenance, and Decontamination Remain with the instrument until it reaches its