4g Router Firmware Upgrade [portable] - Huawei Lte Cpe B593

If you have reached this point, it means something went wrong. Your router might be stuck in a boot loop, only the power light is on, or the web interface is unresponsive.

It is highly recommended to perform a factory reset after an upgrade to clear out conflicting old system caches. Press and hold the physical button on the side of the router with a pin for 10 seconds until all lights flash. Share public link huawei lte cpe b593 4g router firmware upgrade

A factory reset is sometimes necessary after a firmware upgrade. To avoid re-entering all your Wi-Fi and APN settings, back up the configuration first. If you have reached this point, it means

Once the router restarts, it’s time to verify the upgrade was successful. Press and hold the physical button on the

Open a web browser, enter 192.168.1.1 (or 192.168.8.1 ) in the address bar.

Ensure your router and computer are plugged into a stable power source. A power loss during an upgrade will brick the router.

Huawei designed the B593 with two primary methods for performing a firmware upgrade.