rootfs.squashfs or rootfs.ubifs : The read-only or read-write root file system.
) for cross-compilation and configuring the specific toolchain for your chip series (e.g., SSD20X or Takoyaki). comake.online 1. Build Compilation Environment sigmastar sdk install
Once the device flashes and reboots, access the console through serial debugging (UART). If you see the login prompt, your SigmaStar SDK installation was successful. uname -a Test GPIO: Verify /sys/class/gpio is accessible. 8. Summary Checklist Key Component Install Dependencies apt-get install Extract SDK tar -zxvf Setup Toolchain export PATH Compile make (Alkaid) Flash ISP Tool/SD Card rootfs
# Example for a specific chip profile (e.g., SSC335 or SSD202) make dis_config Use code with caution. Build Compilation Environment Once the device flashes and
This may take 3–5 minutes. The output should reveal a directory structure containing:
: Some older scripts require Python 2.7 specifically. Use alias python=python2 if the build scripts throw syntax errors.
Before unpacking the SDK, update your package manager and install the essential build tools, 32-bit compatibility libraries, and utilities. Open your terminal and run: