Place the red lead on the positive side of the component, and the black lead on the ground (negative) side. Read the voltage on the LCD display. 3. Measuring Resistance Turn off power to the circuit being tested. Switch the dial to the Ohms (Ω) setting. Connect the leads across the component.
Red test lead. Used exclusively for high-amperage measurements up to 10 Amps. Fused for safety. 3. Step-by-Step Operating Instructions Measuring DC and AC Voltage Plug the black lead into COM and the red lead into V/Ω/Hz . Turn the rotary dial to the V position. blue point mt596a multimeter manual
Unlike basic meters, the MT596A includes functions specifically tailored for vehicle systems: RPM & Ignition Testing Place the red lead on the positive side
, Hz), and specific modes like (Direct Current) or AC (Alternating Current). It also includes a low-battery indicator icon. 2. Primary Function Buttons Measuring Resistance Turn off power to the circuit
This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.