Ats-20 Radio Manual < Best Pick >

Change the modulation type. Pressing this switches between AM, USB (Upper Sideband), LSB (Lower Sideband), and CW (Continuous Wave/Morse Code).

to enter volume mode, then rotate the encoder. A short press on usually acts as a quick Tuning & Steps : Press the

Press the button to cycle through modulation types. This is critical for listening to different types of broadcasts: FM: For standard commercial radio stations. ats-20 radio manual

Fully extend the telescopic antenna for shortwave (SW) and FM. For AM/MW reception, the radio relies heavily on its internal ferrite bar, so rotating the physical body of the radio can drastically improve the signal.

The ATS-20 can shift between different frequency spectrums seamlessly: Change the modulation type

The LCD screen will initialize and display the last saved frequency. 2. Basic Tuning

Press and hold the POWER button until the OLED screen lights up. A short press on usually acts as a

Press the button once. The volume indicator on the screen will flash.