This means for the vast majority of standard RAID configurations, you on a P420i. RAID 0, 1, 5, 6, 10, 50, and 60 are all available as standard features. The HP Smart Array Advanced Pack 2.0 (SAAP 2.0) became part of the base feature set.
The HP Smart Array P420i is a widely used, integrated 6Gb/s SAS RAID controller found in Gen8 HPE ProLiant servers. While it provides excellent baseline RAID performance out of the box, many advanced storage capabilities are locked behind a software license.
If your controller is updated, you likely do not need a separate license for: RAID 6 and RAID 60 (Advanced Data Guarding). Advanced Capacity Expansion (ACE). Mirror splitting and recombining. Advanced Data Mirroring (ADM). hp smart array p420i license key new
P420i firmware version 3.54 or higher (Version 8.32 recommended).
The P420i is a solid controller marred by outdated licensing. Do not let a 25-digit key hold your storage performance hostage. Use the hardware bypass (PCIe card), and get back to managing your servers. This means for the vast majority of standard
Adds dual-drive simultaneous failure protection for critical data.
A: Yes. Most P420i controllers come with a 60-day evaluation license for RAID 5. You can enable this in SSA without a key. After 60 days, the RAID 5 volume becomes read-only until you install a permanent key. The HP Smart Array P420i is a widely
A license key alone cannot magically activate advanced features if the physical hardware requirements are unmet: Requirement Description 1GB or 2GB Flash-Backed Write Cache module installed.