Xerox Fault Code 043-343 ((hot)) Now

Verify that the connection between the YMC link sensor ( P/J108 ) and the Drive PWB ( P/J407 ) is seated perfectly.

If a drum cartridge is misaligned, the motor gears will not mesh properly. Open the front cover of the Xerox printer. Xerox Fault Code 043-343

Improperly seated drum cartridges or internal drive components. 3. Operational Impact Service Interruption Verify that the connection between the YMC link

The most common culprit is a physical blockage or high resistance within one of the drum cartridges (Cyan, Magenta, Yellow, or Black). If the drum cannot spin freely, the motor strains and trips the error. If the drum cannot spin freely, the motor

When you run this code, the machine will attempt to activate the FC/BW drive switching mechanism. Visually observe the inside the machine (located near the right-side door). The link bar should move either up or down.

: Contact your Xerox service provider with your serial number and this specific code.