3sk41 Datasheet //free\\

The Kenwood TS‑520S uses a 3SK41(L) as the RF mixer Q1, where it converts the incoming signal from 1.8 to 28 MHz to the intermediate frequency. It is also found as Q9 on the Noise Blanker board in the same transceiver, where it helps suppress impulse noise. The Kenwood TS‑820 and TS‑830S are other examples of hybrids that incorporate the 3SK41 in the RF unit.

operating points on the replacement’s datasheet, as GaAs and Silicon devices bias differently. 3sk41 datasheet

Optimally rated for operations extending up to 700 MHz 3SK41 Package and Pinout Architecture The Kenwood TS‑520S uses a 3SK41(L) as the

The 3SK41 typically comes in a metal-can package (TO-72 or CAN-4) with four pins. Careful attention to the pinout is required to avoid damaging the device during installation. operating points on the replacement’s datasheet, as GaAs

(metal can) package, which provides excellent shielding for RF stability. High Gain & Low Noise