Owon Hds2102s Firmware Update Verified [hot] (Fully Tested)

The battery percentage indicator seems slightly jumpy (20% -> 45% instantly). This is cosmetic.

Significantly cuts down the latency when switching voltages in multimeter mode. owon hds2102s firmware update verified

| Step | Action | Critical Action | Verification | | :--- | :--- | :--- | :--- | | 1 | | Check in System -> System -> 1/2 -> About . | **Only proceed if your version is V1.5.1. ** | | 2 | Get the File | Download from the official OWON link . | File inside the zip is scope. upp . | | 3 | Prepare Device | Connect device to PC using USB cable . Set USB Mode to MSC . | Device appears as a disk drive on your PC. | | 4 | Update | Delete all files on the drive. Copy scope. upp to the root of the drive. | Use System -> Upgrade on device. | | 5 | Final Check | After reboot, navigate to About . | Firmware version shown is V1.5.1 . | The battery percentage indicator seems slightly jumpy (20%

Enhases UI responsiveness and eliminates rare boot-loop freezes. | Step | Action | Critical Action |

The Owon HDS2102S Go to product viewer dialog for this item.