Niton Xlt 898 User Manual Page

Proper operation of this analyzer hinges on understanding its user manual. This article provides a comprehensive overview of the topics, including setup, calibration, safe operation, and maintenance. 1. Getting Started: Niton Xlt 898 Setup

Position the analyser window flat against the target sample material. Niton Xlt 898 User Manual

| Part | Part Number | |------|--------------| | Battery pack | NIT-BAT-XL898 | | AC charger | NIT-AC-12V | | RS-232 cable | NIT-CBL-232 | | Check sample kit | NIT-CK-898 | | Helium purge kit | NIT-HE-898 | Proper operation of this analyzer hinges on understanding

Before powering on the unit, inspect the exterior housing. Check the Kapton/Proline window covering the measurement aperture. If the window is torn, punctured, or dirty, replace it immediately to prevent internal contamination of the detector. Step 2: Powering On and Standardization Insert a fully charged battery into the handle. Turn the power switch to the position. Allow the system to initialize and complete its self-test. Getting Started: Niton Xlt 898 Setup Position the

Use the desktop cradle charger for spare battery maintenance. 2. Powering On the Device Press and hold the power button for three seconds. Wait for the system initialization boot sequence to finish. Let the instrument warm up for at least 15 minutes. 3. Standard Calibration Verification Wipe the analysis window with a lint-free cloth.

Place the measurement head flush against the sample. For the XLt 898He model, a helium-purge path allows for the detection of light elements like Al, Si, and Mg. Data Management:

Wear a personal radiation dosimeter badge during your shift.